Fix: No Bootable Image Found, Notebook Will Be Shutdown

Highlights

• Your laptop may be shutting down due to the frustrating error “No Bootable Image Found, Notebook Will Be Shutdown.”
• When you encounter this error, you may be unable to access important files or complete your work.
• Fortunately, you can fix it! This error can be resolved by adjusting your system settings or addressing hardware problems.

Whether used for personal or professional purposes, laptops and notebooks have become indispensable tools in the digital age.

It can be frustrating, however, to run into technical problems, especially when you encounter an error message like, “No Bootable Image Found, Notebook Will Be Shutdown.”

Don’t want to miss the best from TechLatest ? Set us as a preferred source in Google Search and make sure you never miss our latest.

In other words, your device cannot find an operating system to boot from, which renders it unusable until the problem is resolved.

Content Table

What is “No Bootable Image Found, Notebook Will Be Shutdown” Error?

If you cannot start your computer and you see “No Bootable Image Found, Notebook Will Be Shutdown”, your Boot Options, Mode, or BIOS settings might be incorrect.

When the system cannot locate the correct starting disk, often due to incorrect settings or file glitches, this error occurs.

It can also happen when the operating system drive is accidentally changed during the installation process.

Why does the No Bootable Image Found Error Occur?

There are a variety of reasons for this, including malfunctioning hardware, corrupted files, or misconfigured settings. Here are some of the most common causes:

1. Hard Drive Issues : No operating system will be detected if your hard drive is damaged or improperly connected.
2. Corrupted Boot Files : Malware, improper shutdowns, or conflicts with software may corrupt system files.
3. BIOS Configuration : Either the BIOS settings need to be correct, or the system will not recognize the bootable drive.
4. Faulty Boot Sequence : An incorrect boot sequence may cause the system to attempt to boot from an unreachable drive.
5. Operating System Errors : Sometimes, the error is caused by issues within the operating system itself, such as corrupted or missing files.

How to Fix “No Bootable Image Found, Notebook Will Be Shutdown” Error?

Here are some steps that will help you resolve the no bootable image found, Notebook will be shutdown error:

Fix 1: Configure UEFI/BIOS boot options

In your computer, the BIOS configuration loads the root disk and runs the operating system.

If you encounter any boot-related problems, examine the BIOS settings and adjust the Boot options accordingly.

To fix this error, the Notebook will be shut down if no bootable image is found.

1. You need to restart your computer and press the BIOS key.
2. Go to System Setup and disable Secure Boot .
3. To enable Legacy Boot Mode, go to Boot Maintenance Manager > Advanced Boot Options > Boot Mode > Legacy .

1. You should save your BIOS settings, exit your BIOS, and restart your computer. Check to see if the problem has been resolved.

Fix 2: Reset BIOS to Default

The BIOS settings may have recently been changed or updated and that’s why the problem began. If that is the case, consider resetting the BIOS back to its defaults.

To get started, follow these steps:

1. You should press F2/F9/F12, or whatever key your computer manufacturer specifies when you turn your computer on.
2. I have a Dell PC, that why I click the Load Defaults button or press F9/Alt + F to load default settings. You can check for the similar options.

1. In the BIOS, find the Load Defaults option, press ESC , and click Apply Changes .
2. Exit the BIOS setup window. The “No Bootable Image Found” error should disappear after your system restarts.

It may be useful to reset your BIOS settings to their default settings if the error persists after adjusting these settings. Once you do this, your Notebook might start up smoothly again.

Fix 3: Reinstall the Hard Drive

You might need to reinstall the hard drive to identify hardware problems if the issue persists. In some cases, this “no bootable image found notebook will be shut down” error can be caused by an incorrectly installed hard drive.

I recommend removing the hard drive and reinstalling it. Here are the steps you can follow:

Note: Your Notebook’s model will determine the exact steps you need to follow before beginning the reinstallation process.

1. Turn off the system and remove all cables.
2. Remove the lid from the laptop by holding it upside down.
3. It is necessary to remove the battery and hold the power button for a few seconds to drain the entire electric charge.
4. Make sure the drive is disconnected and then reconnected gently. Plug the drive into the socket tightly.
5. Ensure that the battery is inserted, the base panel is screwed on, and the system is turned on.

It may be that the drive is defective if the system fails to boot up. It may be necessary to replace the drive in order to resolve this issue.

Fix 4: Reinstall the Windows

The bootable image is not detected by the system because of a problem with the operating system files. In this case, you will have to reinstall the operating system.

Download the ISO file before you create the bootable image, and make sure the boot option is correct.

1. Restart your computer after inserting the Windows installation media.
2. Select “ Install now ” from the installation media.
3. In the “ Custom: Install Windows only (advanced) ” box, follow the on-screen instructions.

1. For Windows installations, select the installation drive and click “ Next .”

1. To install Windows and set it up, follow the prompts.

Fix 5: Use a New Drive

The usual fixes won’t help if you get a “No bootable image found” error on your Notebook. If you really need to replace a drive, consider using a new one.

It is simply a matter of taking out the troubled disk and connecting it to another computer.

Unless it works there, it’s damaged. To resolve the error, replace it with a new one. By using this switch, you will be able to determine if the disk is experiencing problems.

Using this method, you can troubleshoot and possibly fix the “No bootable image found” error.

What is the best way to shut down a device that is not bootable?

If you receive a “No Bootable Image Found” message, shutting down your device might be necessary.

To do this, simply hold down the power button for a few seconds until your Notebook shuts down completely.

How do you boot your laptop when it says it doesn’t have a bootable device?

In normal circumstances, your laptop won’t boot up because it indicates “No Bootable Device”. There are several reasons why this happens, including a corrupted operating system, a faulty hard drive, or a BIOS error.

So, that’s all we have for you on how to fix the No Bootable Image Found Notebook Will Be Shutdown error.

We hope that this guide has helped you. But that’s not the end of this guide. If you still have more issues, comment below and let us know.

Further Reading:

• The Debloated Windows 11/10: Simplest One Ever
• Download and Install Chrome OS Flex on Your PC or Mac
• Fix: Printer’s “Driver is Unavailable” Error on Windows

Enjoyed this article?

If TechLatest has helped you, consider supporting us with a one-time tip on Ko-fi. Every contribution keeps our work free and independent.

Highlights

• “Driver is unavailable” is a common issue people face with their printer on a Windows PC.
• The issue occurs due to various reasons like the driver is not properly installed or is corrupted, etc.
• We’ve given a number of solutions that can help you resolve the issue in no time and you can get back to your daily chores.

Printing is one of the most common tasks people do on a daily basis. Nowadays there are a ton of printers available on the market, and every one of them requires a different driver to operate.

Hence, you might see a very common error while you try to print any document or photo, i.e., Driver is Unavailable. Since it is a common issue, solutions are also very easy to implement.

Don’t want to miss the best from TechLatest ? Set us as a preferred source in Google Search and make sure you never miss our latest.

“Driver is unavailable” simply means that your system is trying to find the right driver for your printer to operate but can’t find any and halts the printing of any document or photo.

As mentioned earlier, the solutions are simple but before that, we would like to tell you the reason why you get the “Printer Driver is unavailable” error on Windows.

Content Table

Why do you get the “Printer Driver is unavailable” error on Windows?

This is a very common error among Windows 10 users as so many have complained to us that they get the Driver is Unavailable on their Printer devices.

Talking about why you get this error, there is no single reason why this error could pop up on your PC. There are multiple reasons why this error could occur on your PC, and we have listed them down below. You could be facing an error due to any of them.

Here are the reasons:

• Your Printer’s driver is missing or not installed properly
• Your Printer’s driver is corrupted
• Your Printer’s driver is not compatible with your PC
• Your Printer’s driver is outdated
• Windows Update needs to be installed

Now that we have told you about the possible reasons you are getting the “Printer Driver is unavailable” error, we will talk about how to fix the “Printer Driver is unavailable” error.

How do we fix the “Driver is unavailable” error on Windows?

These are some of the ways to fix the “Printer Driver is unavailable” error on Windows, and they are as follows:

1. Reconnect the Printer Device

The first thing you need to do is simply reconnect the Printer Device so that you can check if it works or not. It is quite possible that this could fix all the things, and you don’t need to do anything else to fix the issue.

To reconnect your Printer device, follow these steps:

1. Press the Windows + S key on your keyboard and then type Settings in the window that opens.

1. Launch the Settings window, click on Bluetooth & devices , and then Printers & scanners .

1. Click on the Printer that is troubling you, select Remove Device, and click Yes if you are prompted.

1. After this, your Printer will be removed from your PC, and then you can reconnect your Printer as you would normally do.

If this doesn’t work, you can try the other troubleshooting methods mentioned below.

2. Update your Printer Driver via Device Manager

If your method of reconnecting the Printer did not work, then you can try to update your Printer’s drivers because outdated drivers could also cause problems with the functioning of any device.

To update your Printer’s drivers inside Windows, follow these steps:

1. Press the Windows + X key, click on Device Manager , and then expand the Printers menu.
2. Right-click on the Printer listed in the menu and then click on Update Driver to update its drivers.

1. Select the Search Automatically for drivers option and allow Windows to search for existing drivers inside the system as well as online.

1. Wait for the driver installation to complete, and then restart your PC for changes to take effect.

3. Install Printer Drivers manually

It is quite possible that Windows cannot find the Printer Drivers, so you may need to install them manually.

1. For this, you need to go to Device Manager once again by clicking Windows + X.
2. After that, you need to go to Printers and Expand the list, right-click on your Printer, and click on Update Driver .
3. Now comes the part where you need to concentrate because you will need to click on Browse my computer for drivers.

1. Download the Printer Driver for your respective printer, depending upon its manufacturer. We have given links to some of the top printer manufacturers down below: Canon Driver Download HP Software and Driver Downloads Epson Downloads Brother Driver Downloads Sharp Driver Downloads Samsung Printer Software Installer
2. Download the correct driver, remember the file path where you have downloaded the drivers, and then select and install them on your PC.

4. Install Generic Printer Driver

Users say installing generic printer drivers instead of those specific to their device manufacturers has also done the job for them. This could be because generic drivers are compatible with each and every printer out there unless there is something specific that needs to be changed.

So, we will try and install a generic driver on our Printer and see if it works.

1. To do that, go to Device Manager by pressing the Win + X key once again.
2. Expand the Printers menu, right-click on your Printer, and click on Update Driver .

1. Then click on Browse my computer for drivers and then click on Let me pick from a list of available drivers on my computer .

1. Click on Generic Software Device as seen above and then click on Next.

1. Now, your Generic drivers will be installed, and you can restart your PC after that.

5. Update Windows 10

While we know that the problem of the Printer Driver being unavailable is related to the drivers of your Printer, it is possible that your Windows being outdated could also be the issue.

We have noticed this issue in users who did not update their Windows 10 and were running an outdated version.

So, make sure to check and update your Windows if you have an update pending because it could bring bug fixes that could fix the “Printer Driver is unavailable” issue.

1. To check for Windows updates, press Win + I simultaneously to open Settings .
2. Now, click on Windows Update .
3. Click on the Check for Updates button and then wait for Windows to check if any update is available.

1. If any update is available, click on the Download and Install Now button and then wait for it to be installed on your PC.

6. Fix Corrupt Windows Files

There can be errors related to “Driver is unavailable” when system files are corrupted.

You can make these files work again with the System File Checker (SFC) and Deployment Imaging Service and Management Tool (DISM).

Run SFC

1. Run Command Prompt as an administrator.
2. Then type sfc /scannow and hit Enter.

1. Wait until the Scan is complete. Whenever it finds corrupted system files, it automatically fixes them.

Run DISM

1. You will need to open Command Prompt as an administrator.
2. Enter DISM /Online /Cleanup-Image /RestoreHealth .

1. Let the process run its course. Be patient; it may take some time.

7. Don’t Let Faulty Drivers Install

Sometimes the issue of “Driver is unavailable” is because of the driver’s latest update. Usually in the latest Windows editions like 10 or 11, Windows tends to update the driver automatically when available.

We can stop this phenomenon by using Microsoft’s Show or hide updates tool. Follow the below instructions step-by-step to do so,

1. Download the Microsoft Show or hide updates tool using this link .
2. Open the app by single/double clicking the wushowhide.diagcab file.
3. Click on the Next button located in the down section of welcome windows.

1. From the two options available, click on the Hide updates option.

1. Check the boxes of the faulty printer and click on the Next button.

1. Finally, select Close the troubleshooter .

By doing this, Windows will ignore any updates available and prevent installing any faulty drivers.

Conclusion

There you go. We have mentioned everything there is to know about the “Printer Driver is unavailable” error, from how it is caused to knowing how you can fix it.

Some part of this article is contributed by Abhishek Jariwala .

Further Reading:

• Why is My Computer Slow All of a Sudden?
• Windows was Dominant, But Now It’s Not: What Happened?
• Winpilot (BloatyNosy): Debloat Your Windows 11 PC (Remove Bloatware)

Enjoyed this article?

If TechLatest has helped you, consider supporting us with a one-time tip on Ko-fi. Every contribution keeps our work free and independent.